Header Image
What is this?
0
Share PagePrint Page

Flat Roof Insulation

About Flat EPS Roof Insulation

 
ACH Foam Technologies' Foam-Control® Flat Roof Insulation provides high long-term R-Value of EPS and labor-saving face laminates. Suitable for use with all roofing membrane materials, expanded polystyrene (EPS) roof insulation is compatible with loose-laid and attached single-ply membranes, conventional built-up roofing or modified bitumen systems.

Foam-Control® Flat Roof Insulation is unfaced EPS and is Foam-Control EPS Roof Insulationsuitable for use with loosely laid single-ply membranes. Flat EPS Roof Insulation is also used with conventional BUR and mechanically or adhesively attached single-ply and modified bitumen membranes when field-applied coverboards are used. Boards are standard 4'x4' and 4'x8' sizes.
 

Foam-Control® Flat EPS Roof Insulation

Type II EPS R-Values

 
Thickness in Inches

2.0
2.4
3.0
3.5
4.0
4.8
7.2 
R-Value
at 40° F

9.1
10.9
13.7
16.0
18.2
21.8
33.8
 R-Value
at 75° F

8.3
10.0
12.5
14.6
16.7
20.0
30.0

ACH Foam Technologies’ Foam-Control® Roof Insulation is available with a factory-laminated fiberboard, perlite or OSB face that gives greater panel integrity and reduces installation time. It's ideal for use with conventional BUR and mechanically or adhesively attached single-ply and modified bitumen membranes. Standard panel size is 4'x4' and 4'x8'. OSB-faced panel size is 4'x8'.

ACH Foam Technologies' expanded polystyrene (EPS) Roof Insulation is recyclable and environmentally friendly. It contains no CFCs, HFCs, HCFCs or formaldehyde, and it comes with a 50-year thermal warranty.

More Tech Data & Literature