Foam-Control® R-SHIELD® Roofing Recover Board
Solution for Re-Roof and Over-Deck Applications
Foam-Control® R-SHIELD® comes with factory applied plastic film facings compatible with Single-Ply Membrane roofing systems. Foam-Control R-SHIELD can be applied directly over existing roof membranes and structural roof decks providing a one step recover board insulation resulting in reduced material and labor costs of roofing.
Advantages of Foam-Control® R-SHIELD® Recover Board
-
Film-faced for toughness
-
Superior moisture resistance
-
No CFC, HCFC, HFC, or formaldehyde
-
No long-term R-value loss or thermal drift
Benefits of Foam-Control® R-SHIELD® Recover Board
Foam-Control R-SHIELD is the preferred re-roofing and over-deck solution for Contractors, Architects and Engineers. It is the most cost-effective roofing recover board insulation on the market. Foam-Control R-SHIELD is for use with a variety of Single-Ply systems, including TPO, EPDM, PVC, CPE, CSPE, EIP, NBP, and TPA.
Strength/R-Value
|
|
Compressive Strength1, psi
|
R-value/inch2
|
|
75º F
|
40º F
|
|
100
|
10
|
3.9
|
4.2
|
|
130
|
13
|
3.9
|
4.3
|
|
150
|
15
|
4.2
|
4.6
|
|
250
|
25
|
4.4
|
4.8
|
1 Compressive strength @ 10% deformation.
2 R-value units are °F·ft2·h/Btu.
3 Recommended for design in WARM climates.
4 Recommended for design in COLD climates.
5 Foam-Control R-SHIELD is available with a foil face. A foil face exposed to a cavity wall air space provides approximately an additional R-value of 2.0. |
Foam-Control R-SHIELD is available in a wide range of standard R-values and thicknesses to meet your needs.
R-5, R-7.5, R-10, R-15
Strength/R-Value Recover Board Fan Fold Configuration
|
|
Compressive Strength1, psi
|
R-value/inch2
|
|
75º F
|
40º F
|
|
100
|
10
|
1.9
|
2.1
|
|
130
|
13
|
2.0
|
2.1
|
|
150
|
15
|
2.1
|
2.3
|
1 Compressive strength @ 10% deformation.
2 R-value units are °F·ft2·h/Btu and are for 1/2 inch thickness
3 Recommended for design in WARM climates.
4 Recommended for design in COLD climates. |
Foam-Control R-SHIELD fanfold is available in 4' x 50' sheets and comes in 3/8" and 1/2" thicknesses.
Product thicknesses for standard boards are provided in the Foam-Control R-SHIELD Thickness Selector. Project requirements vary, so Foam-Control R-SHIELD can be ordered in any R-value thicknesses to meet your needs.
More Tech Data & Literature