|
|
|
|
4 Part System
1. Pre-Made Corners - full height EPS corner for extra strength and ease of installation
2. Panels - 21/2 high density EPS panels with rating R-25
3. I-Beam Studs - 24 gauge galvanized steel ladder ties create a tremendously strand structure for concrete pouring plus a continuous vertical stud for drywall or siding on 12 centers.
4. Bottom and Top C-Channel - for laying out and keeping w
Expanded Polystyrene ICF Panels
Available in any custom height up to 12 ft.
2.5 in. standard thickness - available up to 4 in. thickness
12 in. standard width.
1.95 pcf minimum density
R-Value of 4.6/in @ 40° F.
EPS Panel Manual
Expanded Polystyrene Corner Sets
Pre Molded Corners
Available in any custom angle
Available for any width wall
Available with or without attachment strip
EPS Corner Set Manual
Polyvinyl Chloride (PVC) I-beams/Studs
Custom heights to 16 ft.
Nominal concrete widths of 4,6,8, & 10 in.
Rebar Positioners
6 in. cross tie spacing
Cost Effective
Lightweight
Easy to cut/modify
Recycled Material!
Continuous Attachment from footing to sill plate.
I-beams/Studs Manual
Steel I-beams/Studs
Custom heights to 16 ft.
Nominal concrete widths from 4 to 24 inches (increments of 2")
12 in. cross tie spacing
Rolled 26 gauge (doubled) galvanized steel
Custom configurations for drop brick ledge
Continuous Attachment from footing to sill plate.
I-beams/Studs Manual
C-Channel
Eliminates the need for horizontal walers!
Pre-stamped corner peices
Unique feature of TF System®
Keeps walls straight!
C-Channel Manual
ICC Evaluation - ESR 1006
Material Safety Data Sheet (MSDS)
|
|
|
|
|