|
|
|
R-Control® Perform Guard EPS is a termite
resistant insulation for perimeter and
underslab applications. It stops energy
loss at the foundation and slab.
The application of insulation in these
areas helps to meet local, state, and
national energy codes.
Perform Guard EPS is stable and has
very low moisture gain when used in
properly drained designs. Perform
Guard EPS retains 95% of its R-value
even at 4% moisture gain. Perform
Guard EPS may also be used on the
interior of foundation walls as crawl
space insulation.
Advantages
Resistant to termites
Meets code requirements for
ground contact
Stable R-Value
No CFC, HCFC or HFC
Less cost & comparable performance
to extruded polystyrene
Warmer foundations and
basements
Dew point moved to outside of
wall
Compression protection from
expansive soils
Specifications
Perform Guard EPS as Perimeter/Underslab Insulation
shall be installed as shown on drawings. Use
R-Control Do-All-Ply® and/or fasteners for attachment.
Provide type (specify), size (specify) and
thickness (specify). Install in compliance with manufacturers
application guidelines and applicable
building codes. Note: provide drainage away from
Perform Guard EPS for optimum performance.
Protect material during installation, backfilling, concrete
pouring, or related operations. Perform Guard
EPS must be protected from exposure using a weather
resistive covering.
|
Download a PDF file of our Perimeter Underslab brochure.
 |
|
|
|
|