foam technologies
Expanded Polystyrene
Home | Site Map | Contact Us
  Home

EPS Foam Insulation

EPS Basics
EPS Q&A;
EPS Properties
EPS Manufacturing
High Strength EPS
Environmental
Contact Us


Downloads
EPS Literature
EPS Spec (Word)
ICC ES Code Report
EPS Product Testing


Technical Library:

Login Here

Not a member?
Register Here.

Problems signing on?

R-Control® EPS Flotation Blocks are highly buoyant and can be shaped for almost any application. R-Control EPS flotation blocks work in synergy with chemical and impact resistant coatings/coverings for maximum service and environmental safety. Protective coatings/coverings must be used to encapsulate the R-Control EPS. This will ensure optimum service life and meet many of today's marine design standards.

Extremely Buoyant
R-Control EPS is extremely buoyant. One cubic foot of material will float 60 lbs. of weight at water level. R-Control EPS Flotation Blocks can be made in a variety of sizes, and are easily installed using common tools and assembly techniques.

Highly Stable
R-Control EPS Flotation Blocks are made from highly stable molded expanded polystyrene. With proper care and protection they will not corrode, decay or sink when punctured, and will give years of flotation service.

Environmental Advantages
R-Control EPS Insulation...
  • Contains no CFC, HCFC, or HFC
  • Contains no formaldehyde
  • Can be recycled
  • Inert, non-nutritive, highly stable
  • Will not decompose, decay or produce gases or leachates

    Design Considerations
  • Fresh and saltwater compatible
  • Protect from mechanical damage: decking above; skirting to or below water line may also be required
  • Coatings/coverings inhibit damage from wildlife, and other mechanical and chemical damage
  • Install with through-bolts and 6" dia. washers minimum, or strapping of non-corrosive metal installed with compatible screws-stainless steel, copper, hot-dipped galvanized, etc.
  • Marine growth may attach to blocks
  • Available in a range of Types

    Specifications

    R-Control EPS Flotation Blocks will be provided in Type, size and thickness as shown in design drawings and specifications, and as approved in manufacturer's shop drawings.
    Special shapes and custom cuts will be integrally fabricated by the flotation block manufacturer. Chemical resistant and durability coatings/coverings must be provided to encapsulate the R-Control EPS Flotation Block.





  • Download a PDF file of our Flotation brochure.

    Downloadable Drywall Backer Brochure

    Video 
    Learn more about Expanded Polystyrene (EPS)


    Industry Links
    EPSMA
    AFPR
    SIPA
    ICFA
    Energy Star

    EPS Applications
    Fabricated EPS
    Drywall Backer
    Exterior Sheathing
    Flotation
    Perimeter Underslab
    Void Fillers


    achfoam.com Home | Site Map | Contact Us

    © Copyright 2006 AFM Corporation.